Products
Filters
LGHE3C/PR Power Wire Harness
3 Section Kiln
LGHE3C/PR Power Wire Harness 3
LGHE3C/PR power wire harness 3 section
LGHEBM/PR Harness Elem Bottom
LGHEBM/PR Power Harness Element Bottom Easy Fire
LGHEMD/PR Harness Elem Middle/B
LGHEMD/PR Power Harness Element Middle Easy Fire
LGHEMD/PR Power Elem Leads m/b
LGHEMD/PR power element leads middle/bottom easy fire
LGHETP/PR Harness Elem Top
LGHEtp/PR Power Harness Element Top Easy Fire
LGHETP/PR Power Elem Leads Top
LGHETP/PR Power Element Leads top zone easy fire
LGPB2P/EF Power Term Block 1ph
LGPB2P/EF Power Terminal Black 1phase
LGTRPW/EF Power Terminal Strip
LGTRP/EF Power terminal strip easy fire
Lid Brace Pkg 1227 #0363
Part number 0363-000
Lid Master Calipers Red by Giffin Grip
Make one measurement and you have its opposite immediately. The Lid Master does the work of two calipers with far greater speed and accuracy! Plus,...
View full detailsLight Soda Ash 1# - NZ
Donated to Cornell by Nan Zantal. All proceeds will go to supporting Sinclair Community College Students looking to attend workshops at Cornell. Th...
View full detailsLithium Carbonate
It is a source of Lithia for glazes. A strong flux, beginning to aid in the melting of glazes at 1472°F. Used extensively as a secondary flux in le...
View full detailsLJSR20/00 Single Receptcal
Llmenite Granular
A naturally mined iron titanium oxide mineral. It is generally black as sand, odorless, tasteless, opaque under a microscope, non-flammable and ins...
View full detailsLlmenite, Powdered
Loonie 13" Cutting Wire (unbraided) TF35L
This single strand, stainless, wire clay slicer is fitted with flexible finger loops. The wire is .015" (3.8 mm) thick and 13" (33 cm) long.
Loonie Precision Clay Knife TFPKX
A very thin, stiff, fine pointed knife for delicate, low drag clay cutting. 5.5" long (14 cm) - 1,5" (3.8 cm) blade.
Loonmie Jumping Iron Chattering Tool - Flat TFJIF
Flat-end chattering tool for texturing thrown pot surfaces. 190 mm (7.5") long. Blade width: 10 mm (3/8").
Low Fire Soda by Justin Rothshank
Low-Fire Soda is a start-to-finish resource that outlines everything from the different types of clay bodies to use, to decorating and glazing tech...
View full detailsLP 104 Mum Rubber Leaf Forms
This set of 4 rubber leaf forms can be used to make impressions in clay or form dimensional leaves. Measure 1.5" up to 4.5".
LP 128 Large Rubber Rhubarb Leaf Form
This rubber leaf form can be used to make impressions in clay or make dimensional leaves. Individual leaf measures 13" by 13".
lp 158 Cherry Rubber Leaf Forms (Set of 4)
This set of four rubber leaf forms can be used to make impressions in clay or make dimensional leaves. Individual leaves measure 1.5" to 4.5".
LP 182 Large & Small Hydrangia Rubber Leaf Forms (Set of 2)
This set of 2 rubber leaf forms can be used to make impressions in clay or make dimensional leaves. Large leaf measure 11" H x 6.25" W and small is...
View full details