Kiln Parts

Standard relay for all Skutt Kilns with 6 top louvers, L&L Kilns, and most other kilns with the space for the top mount wiring.  (5 louvers on ...

Part #1369 1ph or 3Ph Top Bottom #1369 (Center Matters) 

Part #1372 Element KM 1018 240V T/B

Part #1368 1 or 3 PH

Part #1370 1 or 3 PH

Part #1449 3PH ONLY 

Part #0172

Part #0171

Part #1375 Element KM 1018 208V Center

Type K Thermocouple element only part # t-g-e800/el

Part #1392 Element KM 1018 240V Center

Use these pins to hold loose kiln elements in place. Element pins have sharp ends for easy insertion in the kiln wall. Thes...

EX1099 Kiln Part Order # 1449

EX1099 Kiln Part Order #1447

Part #1373

Replacement motor for the Envirovent II by Skutt.  

DESCRIPTION 50 Amp NEMA 6-50P Power Cord - Unit is a 72" Long Cord with a Three Prong Plug and is used with all Easy-Fire Kilns at any Voltage an...

Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on all Two Section kilns,...

For use with Universal Ceramic Element Terminal Blocks   L&L Part number L-G-UNJM-04 Unit is 4.25" long from center of ring terminal to cent...

Unit includes one block and two terminal screw assemblies. You may also need two mounting screws Part Number L-G-BKUN/CE Part Number: L-G-BKUN/CE

2 Pole Fuse Holder with a Maximum Load Rating of 250 Volts and 30 Amps for typically 240V 1PH 2900 series JD kilns by L&L or some 3PH 208 or 24...

Part Order # 1443