Equipment

Skutt Part # 1515 Type K Thermocouple Element only.  Marked with red for the negative.  Works in all Skutt or Amaco Kilns.   Replace every 50-75 fi...

Type K Thermocouple with terminal block T-G-E800/00

Replacement and/or extra pins to hold potter bats to your Brent pottery wheel.

part #1913020338 Replace this on Skutt or Amaco kilns only when the brass rectangular connections become loose. 

KM 1027, 1227 Skutt Part 1583 silicone coated wiring system

Power terminal strip replacement with tabs Part #1519 Element Terminal Block

Skutt Part 2560 Master Wiring Harness for All 1PH Kilns

Skutt part#2237-000 Deep kilns or greater - High temp cloth

Diamond grit pads 1.75″ x 2.75″ pads  Semi-flexible foam-backed pads with diamond grit 1/2" foam-backing  "workhorse" pads (Price is each, and t...

The design gives great flexibility in making slabs. Very thin, translucent porcelain slabs and thick, heavily textured architectural slabs are equa...

Replacement Deltrol 25 Amp relay for Skutt KilnMaster (KM) kilns. This relay is recommended for KM kilns with 5 louvers on the top of their control...

MUST HAVE FOR THE STUDIO!   Portable Therapeutic Wobble Chair is a proven solution for back pain relief.  Erin uses this at the wheel, attached to...

Sand paper made to stick to a bat to grind down glaze drips and to make bottoms of pots smooth! 8" Diamond Grinding Discs "POTSAVERS" Adhesive-bac...

Silicon Carbide Grinding Discs from DiamondCore® Tools are great for removing glaze drips, smoothing warped pots, grinding chips and leveling kiln ...

Forever bats are 1/4 inch thick, smooth on both sides. Standard drill is two holes 10 inch center-to-center to fit Brent, New Pacificia, Soldner an...

All North Star slab rollers have two rolls, much like the wringer of an old-fashioned washing machine.  Both rolls have a small diamond pattern ("k...

115V, 1.4 Amps, 17 pounds, 2.5 c/ft UL Listed when installed with Skutt Kilns

Part# 1534

Type K Thermocouple element only part # t-g-e800/el

1) Genesis Mini Touch Screen Control - easy to program  2) Hard Ceramic Element Channels protect elements and fragile firebrick, improves kiln life...

Forever bats are 1/4 inch thick, smooth on both sides. Standard drill is two holes 10 inch center-to-center to fit Brent, New Pacificia, Soldner an...

The Workhorse Kiln Look in almost any classroom or Contemporary Studio and you will find a KMT1227-3. It is hands down the most popular low fire pr...

DESCRIPTION 50 Amp NEMA 6-50P Power Cord - Unit is a 72" Long Cord with a Three Prong Plug and is used with all Easy-Fire Kilns at any Voltage an...

part #2561