Kiln Parts

Part #1369 1ph or 3Ph Top Bottom #1369 (Center Matters) 

Part #1372 Element KM 1018 240V T/B

Part #1368 1 or 3 PH

Part #1370 1 or 3 PH

Part #0171

Part #1449 3PH ONLY 

Part #1375 Element KM 1018 208V Center

Type K Thermocouple element only part # t-g-e800/el

Part #1392 Element KM 1018 240V Center

These are the 10-12 gauge double sided crimp on connectors.   Single wire needs to be folded over so it is double up in the connector end and two w...

Part #1371 1PH ONLY

For standard type K thermocouple Skutt Part#1507

Part Order # 1443

Replacement motor for the Envirovent II by Skutt.  

DESCRIPTION Programmable DynaTrol Multi-Zone Control Board - Unit is used for All multi-zone Automatic Kilns TIPS This Dynatrol board is fo...

Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on all Two Section kilns,...

2 Pole Fuse Holder with a Maximum Load Rating of 250 Volts and 30 Amps for typically 240V 1PH 2900 series JD kilns by L&L or some 3PH 208 or 24...

Part #0177 Need 2 of these. 

Part #0176 Element KM 1018 240V Top or Bottom Element Need 2 of these. 

DESCRIPTION 50 Amp NEMA 15-50P Power Cord - Unit is a 72" Long Cord with a Four Prong Plug and is used with All Easy-Fire Kilns at any Voltage a...

Skutt Part#1584

Part #1540 Skutt KM818 requires 4 elements: 2 TB, 2 Center