Skutt Parts

Skutt Part # 1515 Type K Thermocouple Element only.  Marked with red for the negative.  Works in all Skutt or Amaco Kilns.   Replace every 50-75 fi...

Skutt # 0169M16587  

Two prongs inside the kiln that hold up the cone for a kiln sitter old style kiln.   Skutt Part 0113D02641

part #1913020338 Replace this on Skutt or Amaco kilns only when the brass rectangular connections become loose. 

Skutt part#2237-000 Deep kilns or greater - High temp cloth

Power terminal strip replacement with tabs Part #1519 Element Terminal Block

KM 1027, 1227 Skutt Part 1583 silicone coated wiring system

Skutt Part 2560 Master Wiring Harness for All 1PH Kilns

Replacement Deltrol 25 Amp relay for Skutt KilnMaster (KM) kilns. This relay is recommended for KM kilns with 5 louvers on the top of their control...

Key used inside the kiln on the sitter tube to make adjustments on the outside claw for perfect firings.  Skutt Part 0873D02641

For standard type K thermocouple Skutt Part#1507

part #2561

These are the 10-12 gauge double sided crimp on connectors.   Single wire needs to be folded over so it is double up in the connector end and two w...

Great for Low Fire, Smoke, Pit, and Raku firing! This Pyrometer is included with a Firebox 8×4 kiln. For the price, it is a great choice for glass ...

The Dual Input Digital Pyrometer offered by Skutt is of very high quality. It comes with 1 thermocouple but if you purchase an additional one, this...

Our rolling stands are constructed out of heavy duty, welded square tubing and fitted with high quality, locking polypropylene castors. Polypropyle...

These pins fit all kilns. Used for pinning your elements down at brick corners and centers.

O Ring  and circuit chip for Diagnostic Computer

Skutt Part #1906C01338 All KM 1 PH models except KM714 and smaller kilns

Skutt Part#1584

Skutt part# 1925C01338