Standard Ceramic Supply

AVAILABLE IN STORE ONLY - CLAY PRICING C/4-C/6 Plastic clay for wheel and modeling. Granular manganese gives speckled surface. Ideal temperature fo...

AVAILABLE IN STORE ONLY - CLAY PRICING Firing Range: Cone 4-6 Plastic low fire smooth body. We highly recommend testing for glaze and underglaze fi...

AVAILABLE IN STORE ONLY - CLAY PRICING C/4-5 Gives a reduction-like dark brown color in an electric kiln. Smooth and plastic. Good for all techniqu...

AVAILABLE IN STORE ONLY - CLAY PRICING Cone 6-10 Near white plastic stoneware body. Good for use with bright glazes. Available with and without fin...

AVAILABLE IN STORE ONLY - CLAY PRICING Cone: 5Wet Color: Light GrayFiring Color: Oxidation: Off-White - Reduction: Gray-WhiteTexture: Slightly Coar...

AVAILABLE IN STORE ONLY - CLAY PRICING C/06-2 Low fire plastic terracotta designed for classroom. Traditional terracotta color at C/06 oxidation, b...

AVAILABLE IN STORE ONLY - CLAY PRICING C/4-6 Same as clay 112 but without the manganese specks. Ideal for wheel ad slab work. Cone 4 Average Shrink...

AVAILABLE IN STORE ONLY - CLAY PRICING C/6-10 Smooth throwing body. Orange-brown in reduction. Gray at C/10 oxidation. Cone 6 Average Shrinkage 12....

AVAILABLE IN STORE ONLY - CLAY PRICING C/04-10 Open clay body specially formulated to withstand thermal shock. Contains sand. Cone 04 Average Shrin...

AVAILABLE IN STORE ONLY - CLAY PRICING C/6 A white body formulated for C/6 firing. Plastic and throwable. Cone 6 Average Shrinkage 12.0% Absorption...

AVAILABLE IN STORE ONLY - CLAY PRICING C/6 Porcelain body with a parian like quality. It's white, tight and translucent when thin. Contains no ball...

 AVAILABLE IN STORE ONLY - CLAY PRICING C/6-8 Red stoneware body with sand and grog. Oxidation yields red at C/4, deep sand at C/8. Cone 6 Average ...

325 mesh silica is typically used in glazes.

Water Based Wax that can be tinted with food coloring and removed from bisque with rubbing alcohol. Clean up is a breeze using soap and warm water....

AVAILABLE IN STORE ONLY - CLAY PRICING C/4-6 A nice plastic clay for throwing and hand-building. At C/6 oxidation it's a warm brown color usually...

AVAILABLE IN STORE ONLY - CLAY PRICING Cone 06-4 Versatile clay with fine grog. Use for handbuilding, slab work and wheel. Cone 06 Average Shrinkag...

AVAILABLE IN STORE ONLY - CLAY PRICING C/06-04 Same as 105 but with fine grog. Cone 06 Average Shrinkage 5.0% Absorption 19.0% Cone 04 Average Shri...

Sodium silicate is commonly used in ceramics as a deflocculant in slip preparation by neutralizing the charges of particles in the slip, allowing f...

Ferric oxide. Basically the same as black iron oxide except not as concentrated.

A green powder used as a glaze colorant. Depending on conditions and formulation it may produce green, blue-green or copper red. TOXIC IN RAW FORM.

AVAILABLE IN STORE ONLY - CLAY PRICING C/02-9 An all purpose stoneware clay with a wide firing range for throwing and modeling. Buff color at low t...

A black powder which gives red, brown, purple or black tones to clay bodies and glazes. A strong flux when added in large amounts to clay bodies.

AVAILABLE IN STORE ONLY - CLAY PRICING C/8-10 A porcelain body with parian like quality. It's white, tight, and translucent when thing. Contains no...

A titanium dioxide tan colorant which contains a small amount of iron. Used both for color and its tendency to provide various mottled textures.